For a site visit
Warehouse and industrial site viewing checklist
Prepare the questions to take on a viewing. The list changes with the property type and activity you select.
Checks to take on site
- Confirm that the premises and operator allow your intended activity. Ask who issues any additional approval.
- Ask for the documented electrical allocation and confirm who controls the connection.
- Trace the route for your largest vehicle or the equipment you need to bring to the premises.
- Measure the usable clear height beneath beams and services.
- Count the loading doors and check size and access against the vehicles you will use.
- Ask for current fire and life-safety documents and any further approval your fit-out or use may need.
Look up before planning your layout
Measure to the lowest overhead service where you plan to store or move goods. Mark the column positions so you can check the rack and aisle layout.
What to check at a warehouse
Use this example to plan a viewing.
Get the approved load in kW, then map it against your machinery and fit-out requirements. Request the load schedule before comparing buildings.
Check a power scenarioCheck the door height, whether loading is dock-height or at grade, and whether your largest vehicle can turn on site during operating hours.
Estimate loading baysMeasure to the lowest beam or service. Then check whether lighting, sprinklers and your racking arrangement reduce usable stacking height.
Sketch the layoutConfirm the activity can operate on the site, and check any restrictions on storage, noise, ventilation or outside space.
